Adaptive-technologies 4X2-X462-4X-FS Bedienungsanleitung
Stöbern Sie online oder laden Sie Bedienungsanleitung nach Video Adaptive-technologies 4X2-X462-4X-FS herunter. Adaptive Technologies 4X2-X462-4X-FS User Manual Benutzerhandbuch
- Seite / 3
- Inhaltsverzeichnis
- LESEZEICHEN
Bewertet. / 5. Basierend auf Kundenbewertungen
© 2012 Adaptive Technologies Group, Signal Hill, CA 90755 USA (562) 424-1100 Rev.00-01/12
4X2-X462-VWD Video Wall on a Floor Stand
HoverTrack
®
Series 4X2-X462-4X-FS
Assembly Installation Guide 4 Wide Video Wall Floor Stand
This video wall floor stand display the NEC X461 and
X462 monitors in a 4 wide by 2 deep or 4 wide x 3 deep
landscape configuration. The video frame easily attaches to
vertical column by way of bolts and nuts. The floor stand
comes with adjustable feet to compensate for any
unleveled flooring.
Important: Installing video displays is a serious endeavor
that requires experienced professionals. Improperly
assembled floor stands and other structures as well as
the equipment being installed can result in property
damage, injury, death and/or liability to the installing
contractor. Do not proceed if any part of the installation is
in doubt.
Caution: Due to the wide variety of structures,
environments, materials and installation methods, the
installing contractor must exercise good judgment in
selecting the proper area. The base structure must be flat
and capable of supporting the height of the video wall
display. Consult local building codes for further guidance.
Follow these instructions for the most efficient and
safest mounting results.
Package Contents:
3 pcs 4X2-X462-4X-FS-A Vertical column Assembly
8 pcs 4X2-X462-4X-FS-B Horizontal Brace Assembly
6 pcs Adjustable leveler foot, ½-13 thread
13 pcs Hex bolt, 3/8-16 x 5” long, black
48 pcs Hex bolt, 3/8-16 x 3.25” long, black
122 pcs Flat washer, 3/8 SAE,black
61 pcs Nyloc nut, 3/8-16, black
6 pcs End cap, 2 x4, black
Step 1:
Before starting assembly, check included parts list to make
sure all hardware are accounted for.
Step 2:
Attach the end caps to both ends of the base tubes (Figure 1).
Step 3:
Screw in the Adjustable leveler foot into the two weld nut under the base tube (Figure 1).
Step 4:
Connect two horizontal brace’s plates to the bottom side of the right vertical columns using the provided 3/8-16 x 3.25” long hex bolt, flat
washer and nuts. Snugly tighten bolts (Figure 2).
- HoverTrack 1
- Figure 2 2
- Figure 1 2
Inhaltsverzeichnis
Seite 1 - HoverTrack
© 2012 Adaptive Technologies Group, Signal Hill, CA 90755 USA (562) 424-1100
Seite 2 - Figure 1
© 2012 Adaptive Technologies Group, Signal Hill, CA 90755 USA (562) 424-1100
Seite 3
© 2012 Adaptive Technologies Group, Signal Hill, CA 90755 USA (562) 424-1100
Verwandte Produkte und Handbücher für Video Adaptive-technologies 4X2-X462-4X-FS
(5 Seiten)Audiovox APS-785 manuales
Manuales del propietario y guías del usuario para Sensores Audiovox APS-785.
Ofrecemos 1 manuales en pdf Audiovox APS-785 para descargar gratis por tipos de documentos: Manual de usuario
Kommentare zu diesen Handbüchern